how to sharpen clipper blades

How to Sharpen Clipper Blades at Home: A Step-by-Step Guide (Review)

The typical root causes of veterinary visits are related to pet grooming and health such as ear infections, allergies, skin infections, and growths. Hair or fur cutting is a fundamental part of the grooming process, and you need to begin it from the very early years of your pet. How to sharpen the clipper blade is the main item in this article.

If you wait too long, the animal may not like your efforts on grooming too much, especially when it comes to works that include clipping.

If you have a pet with much hair, the grooming sessions might be a lot more intense and also time-consuming. However, also pets with short hair demand routine hair or fur clipping. Regular clipping ensures the very early detection of any problems such as the presence of ticks, fleas, or skin diseases like inflammation, rash, or spots. It also keeps your animal tidy and mats free.

That matted hair is harmful to your pet, and a lot of specialists will advise to get rid of it as an ultimate solution. They also mentioned that some pets had to get a prescription of a veterinarian for sedation before a shave.


Tools You’ll Need/

  • Screwdriver
  • Small brush/toothbrush
  • Cleaning product for hair clippers
  • Sharpening stone
  • Magnet (not essential)


A screwdriver is a very necessary tool and if you do not have it, we offer you a choice of 3 best models of screwdrivers!

Sharpening Stone

Sharpening stone seems to be the most common of working tools used by men already in the very early times. It has actually worked and also still continues to successfully hone blades of all types.

Because it’s robust, utilizing the sharpening stone can be quite a tough job. It will inevitably cost you a couple of drops of sweat before lastly turning that blade sharp.

Sharpening stones come in a wide range of shapes, sizes and material compositions. Stones may be flat, for working flat edges, or shaped for more complex edges. They may be composed of natural quarried material, or from man-made material.

Sharpening stone has been upgraded through the years to reach better outcomes. As a result, more modern sharpening stones seem considerably sophisticated. The best brands stand out for one thing: in general, the majority of vital features are improved for utter comfort and efficiency.

Here are a few of one of the most trusted brands:

Blade Oils for Clippers

We recommend sharpening using oils and suggest considering these brands of oils.

Step by Step

Step 1: Unscrewing the blades from the clipper

  1. Find the screws holding the blades to the clipper itself (note: they are normally found near the blade).
  2. Thoroughly detach the blades or anything else that is removable (clippers vary depending on the brand – some might have a bit more items included). Bear in mind to pay attention to where the pieces were situated.
  3. If the blades do not separate fast, DO NOT use your fingers to pry them apart. Take some tweezers and then pull them apart.

Step 2: Cleaning the blades

  1. There may be hair and also other dirt from previous shaves.
  2. Utilize a metallic brush e.g., steel wool (what you use to clean metal cooking pots) to remove hair and any residues and clean the blades carefully.
  3. Apply cleaning lotion on the blades to remove noticeable rust, if there is any. Lemon juice is a lifesaver when it comes to cleaning corrosion.
  4. As soon as they are clean, completely dry the blades by placing them on a clean paper towel.
  5. You can repeat the previous step till you are satisfied with the cleanness before drying them. You can either leave the blades to air dry or carefully pat them dry with the paper towel.

Step 3: Sharpen the blades

There are three things you can make use of for this step.

  1. Flat stone: You may choose this technique as it is the most hassle-free and maybe the most inexpensive of the three methods. You get a simple flat stone and then rub each blade, to and fro, to sharpen. You can likewise take the commercial path and purchase a sharpening stone that has either diamond or steel finishing.
  2. Grinding wheel: This wheel has either a wet or dry coating in its ridges. You place the blade in the wheel, and the coating is applied on the clipper blade as it moves. The solution is similar to using sand or ash on an aluminum pot to return it the lost shine.
  3. Lapping wheel: This wheel is made of cast iron with grooves on the surface. The wheel moves slower than a grinding wheel as well as the cover on the blades is smoother. You need to place the blades inside the ring of the lapping wheel. When rotated, the blades go on the wheel. It also has a finishing like the grinding wheel, which is applied on the blades.

Step 4: Putting the pieces back together

  1. When you are satisfied that the blades are sharp, very carefully put the items back together in the right order you removed them.
  2. Screw the blades in place.
  3. Note that from time to time, all your clipper blades require is a proper clean. You may test them after cleansing to see if they are still sharp enough, and do not need honing.


Now, to help you with it in the most excellent way, here are the simple tips on how to hone hair clipper blades (in order):

1. Prepare all sharpening devices

Gather and prepare all the essential tools you need. It is necessary now that you have learned each device to the last detail. It would certainly help you avoid some hold-ups throughout the process.

Bear in mind that when you take the very first step, you’ll have to push through right there and then. Blades are typically sensitive to direct exposure – humidity and changing temperature levels.

2. Dismantle the clippers

Very carefully disassemble the blades from the clipper utilizing the screwdriver.

Note that each set of clippers holds two blades. Some advanced clippers may have two blades and also more than two combs. For you to recognize the range of combs beforehand, determine the brand.

How to sharpen clipper blades

As soon as the blades are extracted from the clippers, clean them with the brush. This would be your high chance of cleaning up the entire tool.

3. Proceed with sharpening the blades

The blades should meet the stone’s flat surface area during the process of sharpening. This also applies to both lappings as well as grinding wheels.

The majority of people fail in honing the blades because they tend to miss out on matching both flat surfaces throughout friction. Besides, they almost every time tend to place too much pressure on the blade.

Right here are simple easy-to-remember tips:

High-grit sharpening stone high quality.

Protect a high-grit stone of high quality for surefire impact. A 1,000-grit stone will do.

Flat on flat.

Ensure the flat section of the blade touches the flat top of the stone.

Some blades may have uneven surface areas. Such models need to be hand-held and also put flat on the floor. Make use of the thumb and the index fingers in doing so. As soon as you have securely positioned the fingers on the top side of the blade, allow the blade to slide.

To avoid cuts, place any thimble-like protection on the fingers.

Magnet helps for unstable hands.

It is actually unnecessary, but it certainly aids to stable results.

The magnet takes care of helping the fingers don’t slide across the blade’s glossy surface.

Easy pressure.

For crying out loud – do not be too hard on the blade. Keep in mind that most blade products easily chip as well as crack.

A light-sensitive pressure will do. However, if you aren’t really sure about the suitable pressure to exert, resort to magnet handles.

Not more than 12 brushes.

Ten brushes on each surface area work well enough. Yet, 12 works like magic, especially when you’re working with rusty blade surface areas.

4. Wash the blades

Thoroughly wash the blades with clean water.

Right here’s a quick hack: let it remain to saturate in hot water for 10 minutes.

When done, wipe the blades with a cloth to dry them.

5. Apply oil on them

As soon as the blades are covered with blade oil, leave them on the cloth for 5 minutes.

While waiting, clean the clippers independently. Wipe them completely dry and then gather them entirely with the blades.

6. Reconstruct the clippers

When putting together, return all the details to their original clipper framework.


The clippers and the blades are virtually inseparable from each other up until you’re by hand separate them. Therefore, the clippers need a special approach in regards to cleansing.

So, right here are straightforward tips on just how to successfully clean hair clippers:

Separate clippers from blades

Once you have dismantled the clipper framework, detach the clippers from the blades.

Remember that different models of clippers stick to different methods of disassembling. No matter, which detail you detached, place it on a towel or tissue first to protect its surface.

Remove hair and other dirt from the clippers using the brush

  • Brush off any clogged hair in between the clipper teeth.
  • Now, focus on the head plate. Brush it with the optimal pressure. Not too soft, not too hard.
  • Continue to the inner upper section of the clipper. Look into gaps where you can place the brush.
  • Rub the brush inside the top part 10 times.
  • For fighting with corrosion and other staining, brush it with a solution consisting of water and vinegar.
  • Leave the detachable parts in hot water for 10 minutes.
  • Allow the clippers to dry on their own before wiping them with cloth.


Can clipper blades be sharpened?

Yes, of course, you can sharpen them yourself, and above we have described in detail how this can be done.

What if I don’t want to?

You can discover lots of alternatives with self-sharpening blades that do not require honing.

You can also take your blades to high street craftsmen like cobblers (footwear repair service people), who can usually sharpen your blades for you. There are additional services, especially for honing blades that you can utilize, or you can send your blades to the manufacturer for honing for a small cost.

All this stated, if you’re planning on utilizing hair clippers to self-cut your hair in the long-term, it truly isn’t worth the trouble of avoiding learning how to sharpen hair clipper blades – it’s simple and also necessary for almost any time in any way. We strongly recommend saving cash from commercial honing by acquiring your sharpening stone and also sliding your blade down it 12 times every couple of months, indeed.

How do I sharpen hair-cutting blades?

Sharpening the hair-cutting blades includes manual dismantling the whole cutting device utilizing a screwdriver, and after that separating the blades from the clippers.

Once done, you proceed by honing the blades using a sharpening stone, or lapping/grinding wheels. Brush both surfaces on a flat section not more than 12 times.

Lastly, soak the blades in hot water for 10 minutes, before using oil on the blades. Finally, reassemble them entirely.

Can I clean the clippers with rubbing alcohol?

Yes, you can. Rubbing alcohol will not damage your clippers.

What types of oil can I apply to the clippers?

You can make use of olive oil, vegetable oil, and various other low-viscosity oils on the clippers.

How do I best lubricate the clippers?

Lubricate the clippers using blade/clipper oil. Drop the right amount of oil into both clippers and blade after cleaning and honing them. Let the oil wrap them in 5-10 minutes.

How much does it cost to sharpen clipper blades?

As we mentioned above, you can take your blades to a high street craftsmen like cobblers (footwear repair service people), who can usually sharpen your blades for you. There are additional services, especially for honing blades that you can utilize, or you can send your blades to the manufacturer for honing for a small cost.

How many times can you sharpen clipper blades?

You can sharpen the blades till you see that the blades have become much shorter. In this case, you should buy new blades.

You can consider one of the following brands of blade sets:


Author of article
Nancy Norman
Hi. My name is Nancy. I've been doing hairdressing for 12 years. I cut and cut from day today. And I like it. I love trying out new hair clippers. Search for new things, share opinions, and look for pros and cons. Recently, I came up with the idea to create my own website and share information with readers. I hope it will be useful.  
Written Articles

Leave a Reply

Your email address will not be published. Required fields are marked *